FREE RETURNS. STANDARD SHIPPING ORDERS $99+
Showing 1–16 of 29 results
Hoppe 16mm Manual Roundbolt Version, Bottom Gear Only Faceplate Width: 5 8 (16mm),Backset: 1-3 8 (35mm),Deadbolt Throw: 1 (25.4mm),Handle Height 36 (914),Bottom Roundbolt Position: 26.30 (668mm),Maximum Cutoff: 5.51 (140mm),Number of Screws: 5
New Style 90 degree HOPPE profile cylinder with Cresent Knob Used on doors that are 1-3 4 thickOverall housing Length: 31.5mm 31.5mm ( 2-1 2 inch) The New Style 90 degree allows homeowner to look at thumb turn and know if door is locked or unlocked.This cylinder can be converted into a 360 degree cylinder.This Cylinder is…
360 degree non-keyed Inactive door profile cylinder with Cresent KnobUsed on doors that are 1-3 4 inch or thicker.Overall housing Length: 40.5 mm 10 mm (2-1 16 inch)This is a Non-keyed cylinder and typically used on inactive passive doors.Measurements:Inside Distance = 1-5 8 inch (40.5 mm)Outside Distance = 3 8 inch (10 mm)Overall (inside +…
Euro profile cylinder w thumb turn, single cylinder for 1-3 4 thick doors, Finishes: Polished Satin Nickel, Chrome Three Keys
Euro profile cylinder w thumb turn, single cylinder for 1-3 4 thick doors, Finishes: Oil Rubbed Bronze Three SC1 Keys
CS Lock Euro Profile Full Cylinder with 90° Turn Key with C-Knob 50MM 50MM 4 Long Colors: Satin Nickel Keyway: Schlage SC1 5 PiN
Bottom Gear, HLS9000 Shootbolt Version, Manual Locking for Active Door.   Faceplate Width: 5 8 inch ( 16mm) Backset: 1-3 8 inch (35mm) Deadbolt Throw: 1 inch (25mm)
16mm Hoppe Swing Hook and Shootbolt,  Bottom Gear Assembly with Shootbolt attached.Faceplate: 5 8 (16mm)Backset: 1-3 8 (35mm)Deadbolt Throw: 1 (25mm)Handle Height: 36 (914mm)Bottom Swing Hook Position: 24.41 (620mm)Number of Screws: 4
Hoppe Cylinder cap removal toolUsed to remove plastic cap from CES cylinders
Dummy HOPPE Multi-point handle set with Dallas lever in satin nickel.The Dallas series features straight, modern lines providing a contemporary aesthetic.This handle set includes interior and exterior handle levers with backplates and all the necessary installation hardware.Function: Dummy – Ridged Handles, No Key, No Thumb turnLever Style: DallasPlate Style: 2161NEscutcheon Plate Height: 9-7 16 inchesEscutcheon Plate Width: 1-1 2 inchesScrew Hole…
Active HOPPE Multi-point handle set with Dallas lever in satin nickel.The Dallas series features straight, modern lines providing a contemporary aesthetic.This handle set includes interior and exterior handle levers with backplates and all the necessary installation hardware.Function: Active – Keyed Cylinder with inside Thumb turnLever Style: DallasPlate Style: 2161NHandle PZ: 3-5 8 inch (92 mm)Escutcheon Plate Height: 9-7 16 inchesEscutcheon…
Multipoint Fuhr sliding patio door lock with 3 hooks for 6-foot 8-inch Door.  Face Plate Measurements: 5 8 Wide x 64-5 8 inches long. Hooks: three hooks, two below the handle, one above. Bottom Hooks Located: 8-1 2 & 24-1 4 inches from the tip of the hook to the center of the handle. Top Hook: 20 inches…
M112P 2172N Keyed Active, Polished ChromeHandle series: MunchenBackplate style: Traditional (2172N)Screw hole spacing: 9-1 8 inchesFaceplate height: 10 inchesFaceplate width: 1-1 2 inchesDoor thickness: 45mm (1.75 inches)Non-HandedMaterial: Solid BrassFinish: Polished ChromeContents:Interior back plate and leverExterior back plate and lever (with keyed cylinder and thumbturn)2 keysInstallation hardwarePriced and sold as a set.
Hoppe – New Style Sliding Door multipoint Lock Hardware Trim Handle set.Active Keyed handle for Hoppe Multi-Point locking sliding doors with 2 hooks;M574 handles and 2165N interior and exterior back plates.This set is keyed Outside with a crescent knob to lock inside. NOTE: This only fits Hoppe 2-point sliding door locks Application: Hoppe Active Sliding…
Hoppe – New Style Sliding Door multipoint Lock Hardware Trim Handle set.Active Keyed handle for Hoppe Multi-Point locking sliding doors with 2 hooks; M151 handles and 2165N interior and exterior back plates. This set is keyed Outside with a crescent knob to lock inside. NOTE: This only fits Hoppe 2-point sliding door locks Application: Hoppe Active Sliding…
16mm Hoppe Swing Hook and Shootbolt,  Bottom Gear Assembly with Shootbolt attached.Faceplate: 5 8 (16mm)Backset: 2-3 8 (60mm)Deadbolt Throw: 1 (25mm)Handle Height: 36 (914mm)Bottom Swing Hook Position: 24.41 (620mm)Number of Screws: 4
End of content
End of content
No products in the cart.
